Product Categories

8-zone Linkage Module

Eight Switching Signals for Alarm-Triggered Linkage with Compatible Monitoring Equipment

Type: AS-08C

→ GET QUOTATION

Related: Alarm Panel

The Athenalarm AS-08C 8-Zone Linkage Module provides eight switching signals for alarm-triggered linkage in compatible security installations. Designed for the AS-9000 series intrusion alarm control panels, it supports integration with compatible video surveillance equipment, DVRs, and electronic map systems.

Using bus communication, the module connects to the supported alarm control panel and can be discovered through the panel’s bus-device search function. Its functions include switching-signal output, siren and armed-status indicator connections, and status indicators for power, arming, alarm, and communication.

[GET QUOTATION]

1. Product Overview

1.1 An Alarm-Linkage Module for AS-9000 Security Systems

The AS-08C is an eight-zone linkage module designed to provide switching signals for alarm-triggered equipment linkage in AS-9000 intrusion alarm installations.

When used with compatible receiving equipment, the module can support linkage between an intrusion alarm system and a wider video surveillance or electronic-map monitoring arrangement. It provides switching signals for supported integration configurations.

The AS-08C communicates with the AS-9000 series alarm control panel through the system bus. An address code setting switch is provided, and installers can use the control panel’s keypad to search for bus-connected expansion modules after wiring.

Four status indicators provide information about power, arming, alarm, and communication conditions.

1.2 Product Quick Specifications

Product selection note: Although the product name uses the term “8-zone,” it has eight switching signals and alarm-linkage functions. It does not establish that the AS-08C provides eight additional wired sensor inputs. Buyers seeking a conventional wired zone-input expander should confirm the required product architecture before ordering.

2. Key Functions for Integration Projects

2.1 Eight Switching Signals for Alarm Linkage

The AS-08C provides eight switching signals for supported alarm-linkage applications in an AS-9000 security system.

These signals can be considered when a project requires an interface between the intrusion alarm system and compatible external monitoring or control equipment.

2.2 Video Surveillance and DVR Linkage

Linkage with video surveillance equipment is a supported application for this product.

In a suitable installation, switching signals from the alarm system can be used for linkage with compatible video surveillance equipment or a digital video recorder (DVR), provided that the receiving device supports the required electrical interface.

The AS-08C does not directly transmit video signals; its designated role is to provide switching signals for supported linkage arrangements.

Compatibility with a particular DVR, recorder, or surveillance platform must be verified before procurement.

2.3 Electronic Map Linkage

Electronic map linkage is also a supported application for the AS-08C.

For projects using compatible electronic-map monitoring equipment, the module can provide switching signals for incorporating alarm events into the broader monitoring arrangement.

The actual behavior depends on the receiving equipment, the required signal interface, and the approved system configuration. Compatibility with specific electronic-map products must be verified prior to deployment/procurement.

2.4 AS-9000 Bus Communication

The AS-08C connects to the AS-9000 series alarm control panel through the system bus.

After the wiring has been completed, the installer can use the panel keypad’s bus-device search function to locate connected expansion modules and establish communication.

A bus search must be repeated whenever a module is added, removed, or replaced.

This module is specified for use with the AS-9000 series alarm control panels. Compatibility with non-AS-9000 control panels is not supported.

2.5 Power, Arming, Alarm, and Communication Indicators

The module has four status indicators:

These indicators provide visible information during installation and initial system checks.

2.6 Siren and Armed-Status Indicator Connections

The module provides dedicated connections for a siren and an armed-status indicator.

The designated alarm connection is used for siren linkage when the module alarms. The arm connection provides a signal to the indicator light when the module is armed.

Installers must follow the approved terminal identification and wiring instructions. Note that individual switching signals may have different output ratings; ensure external loads do not exceed specified limits.

2.7 Multiple-Module Configurations

Multiple eight-zone linkage modules sharing the same address code may be deployed when additional output signals are required or when multiple zones trigger the same receiving equipment.

System expansion is subject to technical limitations and is not unrestricted. The maximum supported module count, address-assignment rules, channel mapping, and wiring limits must be verified against the official system configuration guide prior to deployment.

The maximum number of supported modules depends on the overall system configuration. Consult official technical documentation or support for specific capacity limits.

3. Compatibility and Output Configuration

3.1 Compatible Control Panel

The AS-08C is designed for use with the AS-9000 series intrusion alarm control panel.

Before ordering, integrators should confirm that the project uses the intended alarm control panel and that the external equipment can accept the module’s switching signals.

3.2 Switching Outputs

The AS-08C provides eight switching signal outputs, with technical specifications supporting either a 12V/1A power output or dry contact signals (normally open / normally closed).

3.3 Address Setting and Bus Discovery

The AS-08C features an integrated DIP switch for address code configuration.

Standard Device Discovery Procedure:

1. Complete the module wiring according to the approved instructions.
2. Access the alarm control panel keypad.
3. Enter Device Management → Search Bus Device.
4. Allow the panel to search for bus expansion modules and establish communication.
5. Repeat the search after a module is added, removed, or replaced.

Address settings must follow the official address configuration table and assignment restrictions. For installations involving multiple modules, address allocations must be planned and verified prior to system commissioning.

3.4 Installation and Integration Boundaries

The module should be selected according to the requirements of the overall security system, not solely by its product name.

Before approving an installation, confirm:

• The use of a compatible AS-9000 series control panel.
• The required number and function of switching signals.
• The receiving equipment’s electrical interface.
• The applicable output configuration and load limits.
• The bus wiring and address-setting requirements.
• The permitted configuration for multiple modules.
• The wiring requirements for sirens and armed-status indicators.

An engineering-approved wiring diagram and output specification table should be used where the project requires confirmed terminal-level integration information.

4. Applications

The AS-08C is intended for AS-9000 intrusion alarm installations that require switching signals for linkage with compatible equipment.

4.1 Commercial Security Installations

For commercial premises using the AS-9000 alarm system, the module can be evaluated when alarm events need to be linked with compatible video surveillance, DVR, or electronic-map equipment.

4.2 Video Surveillance and DVR Integration

System integrators can consider the AS-08C for alarm-triggered switching arrangements involving receiving equipment that supports the required electrical interface.

Specific recorder models and integration methods must be verified before installation.

4.3 Electronic Map Monitoring

The module can be considered for security installations that use compatible electronic-map equipment and require switching signals from an intrusion alarm system.

The available functions depend on the receiving interface and approved configuration.

4.4 Multi-Output Alarm Linkage Projects

For projects requiring multiple alarm-linkage signals, the AS-08C provides eight switching signals. Where additional modules are considered, the permissible module count, address settings, and wiring arrangements must first be confirmed.

4.5 Security System Integration and Distribution

Importers, distributors, and system integrators can evaluate the AS-08C as an accessory for the AS-9000 security system range.

It is particularly relevant when the purchasing requirement concerns alarm-linkage outputs rather than additional wired sensor inputs.

5. Technical Specifications

The following table details the official technical specifications for the AS-08C. Additional operational parameters or site-specific requirements are noted where applicable.

5.1 Technical Notes

Output Ratings: The 12V/1A specification represents the maximum allowable power output for designated terminals. Individual switching channels vary in drive capacity. Verify terminal ratings, load limits, and operating conditions prior to connection to prevent overload.

Environmental Conditions: The specified operating temperature is -10°C to +50°C, with a relative humidity range of 0–85% (non-condensing).

System Compatibility: The AS-08C is exclusively designed and designated for use with AS-9000 series alarm control panels. Compatibility with third-party alarm panels is not supported.

Module Expansion: System expansion is restricted by bus loading and address allocation limits. Multiple-module deployments must strictly conform to official system configuration guides and address assignment rules.

6. OEM / ODM and Customization

Athenalarm welcomes B2B inquiries concerning the AS-08C and other intrusion alarm system products. However, the specific OEM, private-label, and customization terms applicable to the AS-08C require confirmation before they can be presented as available services.

For an OEM or bulk-purchasing inquiry, buyers should provide the estimated quantity, branding or packaging requirements, and intended application.

The available customization scope, minimum order requirements, and production schedule should be confirmed in the quotation before an order is placed.

[GET QUOTATION]

7. Procurement Information

Buyers can request a quotation by specifying their required quantity, destination country, expected delivery schedule, and relevant system-integration requirements.

For technical evaluation, include the alarm control panel model and the intended receiving-equipment model where applicable. This helps identify interface questions that may need to be resolved before an order is confirmed.

8. Quality Control

9. Downloads and Technical Documentation

Technical documentation helps system integrators assess wiring, configuration, compatibility, and integration requirements before procurement.

9.1 AS-08C 8-zone Linkage Module User Manual

The user manual covers the product specifications, wiring instructions, indicator functions, bus-device search procedure, and described linkage configurations.

Download: AS-08C 8-zone Linkage Module User Manual

9.2 AS-9000 Bus Wiring Instructions

The AS-9000 bus wiring instructions are relevant to understanding the module’s connection to its intended alarm control panel.

Link: AS-9000 Bus Wiring Instructions

10. Frequently Asked Questions

10.1 Product and Procurement FAQ

Q1. What is the AS-08C 8-Zone Linkage Module?

The AS-08C is an alarm-linkage module designed for AS-9000 series intrusion alarm control panels. It provides eight switching signals for supported applications involving compatible video surveillance equipment, DVRs, and electronic-map systems.

Q2. Which alarm control panels are compatible with the AS-08C?

The AS-9000 series is the designated compatible control panel for this module. Compatibility with alarm panels from other manufacturers is not supported.

Q3. What is the minimum order quantity?

10 pieces.

Q4. Can I order a sample before placing a bulk order?

Yes.

Q5. What is the production lead time?

The standard production lead time is 10 days. Any different lead time for OEM orders or special packaging must also be confirmed before order acceptance.

Q6. Is OEM or private-label supply available?

The OEM and private-label options specifically available for the AS-08C are available. Buyers should specify their branding, labeling, packaging, and documentation requirements so that Athenalarm can confirm the applicable scope and conditions.

Q7. What is the product warranty?

1 year.

10.2 Technical FAQ

Q1. Does the AS-08C provide eight wired sensor inputs?

The AS-08C is an eight-zone linkage module that provides eight switching signal outputs. It is designed for signal linkage and does not function as an eight-zone sensor input expansion module. Projects requiring conventional hardwired sensor input expansion should select dedicated input expansion modules.

Q2. Does the AS-08C transmit video signals?

The AS-08C does not support video transmission. Its core function is to provide switching signals for alarm linkage with compatible external equipment. Actual video surveillance integration depends on the specifications and electrical interface of the receiving device.

Q3. What does the 12V/1A output specification mean?

The AS-08C supports a maximum power output of 12V/1A or dry contact (normally open / normally closed) signals. Output drive capacity varies by individual terminal. Ensure that connected external devices strictly conform to the maximum electrical rating and current limits of the specified terminal prior to connection.

Q4. How does the AS-08C communicate with the alarm control panel?

The AS-08C uses bus communication and is designed for the AS-9000 series alarm control panel. Installers should follow the approved bus wiring instructions and terminal identification.

Q5. How do I search for the module after wiring?

To establish communication with bus expansion modules, access the control panel keypad and navigate to: Device Management → Search Bus Device. The panel will automatically locate connected modules and set up communication. A bus search must be performed whenever a module is added, removed, or replaced.

Q6. Can the AS-08C work with any DVR or electronic-map system?

Universal compatibility with all external equipment is not guaranteed. Connected devices must support the required electrical interfaces. Verify the input specifications and terminal assignments of third-party equipment prior to installation.

Q7. What is the operating temperature and humidity range?

The AS-08C is specified for an operating temperature range of -10°C to +50°C and an operating humidity range of 0% to 85% (non-condensing).

11. Request a Quotation for the AS-08C

11.1 Source an 8-Zone Linkage Module for Your AS-9000 Security Projects

The Athenalarm AS-08C is designed for buyers evaluating an eight-signal alarm-linkage module for AS-9000 intrusion alarm systems.

It is intended for security equipment importers, distributors, wholesalers, and system integrators whose projects require alarm-triggered switching signals for compatible monitoring equipment.

Before confirming an order, buyers should establish that the control-panel family, output interface, receiving equipment, and installation configuration match their technical requirements.

11.2 Suitable B2B Inquiries

• Importers sourcing accessories for AS-9000 intrusion alarm systems.
• Distributors evaluating alarm-linkage modules for their product portfolios.
• Wholesalers purchasing compatible alarm system components.
• System integrators planning alarm-triggered video surveillance or electronic-map linkage.
• Security solution providers assessing switching-signal integration for compatible equipment.

11.3 Information to Include in Your Inquiry

To support an effective technical and commercial review, please provide:

11.4 Request Your Quotation

Contact Athenalarm to discuss your AS-08C purchasing requirements and the technical information needed for your intended installation.

[GET QUOTATION]