As the last and most important line of defense of the community security system, the home burglar alarm system uses fully automatic anti-theft electronic equipment to judge illegal intrusion through electronic infrared detection technology and various magnetic switches in unattended places. Behavior or various gas leaks, through the control box horn or alarm light on-site alarm, and at the same time, the alarm information is transmitted to the alarm center or the owner himself through the shared network. At the same time, when an emergency occurs to someone at home, emergency distress information can also be sent to the community alarm center through various wired and wireless emergency buttons or keypads.

Burglar alarm control panel

Judging and receiving the alarm signals from various detectors, and after receiving the alarm signals, it can alarm according to the preset alarm mode. For example, start the sound and light alarm, and automatically dial the set multi-group alarm. If it is connected to the community alarm center, the signal can be transmitted to the community alarm center. The alarm control panel is equipped with a remote control, which can remotely control the alarm control panel.

PIR motion sensor

It is innovatively designed using microcomputer digital signal technology and high-stability detection devices. It has temperature compensation, anti-strong white light, anti-electromagnetic interference, and eliminates various false alarm factors.

When the intruder passes through the PIR motion sensor, it sends a signal to the alarm control panel, and the alarm control panel immediately alarms.

Door contact, window contact

After the alarm control panel is armed, the intruder opens the doors and windows equipped with door contacts and window contacts, and the door and window contacts send a signal to the alarm control panel, and the alarm control panel immediately starts an alarm.

Remote control

It is used to arm and disarm the burglar alarm system, and the method of use is the same as the common car anti-theft remote control.

Smoke detector

Using a radioactive source and contrasting space and open space for radioactive detection of heavy ions, it is more sensitive whether it is burning with open flame, no fire, smoke, or smokeless combustion.

When harmful gas is detected, the indicator light will be red, and an alarm signal will be sent to the alarm control panel.

Hazardous gas detector

Detection range: detection of combustible gases such as methane, ethane, and liquefied petroleum gas

Detection concentration: methane, propane, ethane, greater than 10000PPM; alcohol, acetate, greater than 1000PPM; ethylene, ammonia, greater than 500PPM

Working environment temperature: -10℃～5℃

Working humidity: less than 95%